Low Power EV Charger 3.5 KW AC
ChargersGO have various Low Power EV Charger Voltage and Power, which can meet wide aspect of requirement. Low Powder ev charger normally is slow charger which is for home use, and some also for commercial use.
![](https://chargersgo.com/wp-content/uploads/2024/05/low-power-ev-charger.jpg)
220V 3.5KW~22KW AC EV Charger
Parameters & Configurations:
General Requirements
EV Charger Type | AC | AC | AC | AC |
Charger Capacity | 3.5KW | 7KW | 11KW | 22KW |
Product Model NO. | HK-ACB/L003P5A-S HKL-ACB/L003P5A-S | HK-ACB/L007A-S HKL-ACB/L007A-S | HK-ACB/L011A-S HKL-ACB/L011A-S | HK-ACB/L022A-S |
Mounting | Wall-Mounted/Column Type | Wall-Mounted/Column Type | Wall-Mounted/Column Type | Wall-Mounted/Column Type |
Input Requirements
Charger Capacity | 3.5KW | 7KW | 11KW | 22KW |
AC Supply System | Single-Phase, 3 Wire AC system | Single-Phase, 3 Wire AC system | Single-Phase, 3 Wire AC system(ANSI) Three-Phase, 5 Wire AC system(ENC) | Single-Phase, 3 Wire AC system(ANSI) Three-Phase, 5 Wire AC system(ENC) |
Nominal Input Voltage | AC220V±15%(ENC) AC240V±15%(ANSI) | AC220V±15%(ENC) AC240V±15%(ANSI) | AC380V±15%(ENC) AC240V±15%(ANSI) | AC380V±15% |
InputFrequency | 50±3Hz | 50±3Hz | 50±3Hz | 50±3Hz |
Environmental Requirements
Ambient Temperature Range | -25 to 55°C | -25 to 55°C | -25 to 55°C | -25 to 55°C |
Ambient Humidity | 5 to 95% | 5 to 95% | 5 to 95% | 5 to 95% |
5 to 95% | -40 to 70°C | -40 to 70°C | -40 to 70°C | -40 to 70°C |
Mechanical Requirements
IP Ratings | IP 55 | IP 55 | IP 55 | IP 55 |
Cooling | Natural Cooling | Natural Cooling | Natural Cooling | Natural Cooling |
Output Requirements
Number of Outputs | 1 | 1 | 1 | 1 |
Type of Each Output | AC220V±15%(ENC) AC240V±15%(ANSI) | AC220V±15%(ENC) AC240V±15%(ANSI) | AC380V±15%(ENC) AC240V±15%(ANSI) | AC380V±15% |
Single Output Max. Current | 16 Amp | 32 Amp | 16 Amp/50 Amp | 32 Amp |
User Interface & Display Requirements
Display & Touch-Screen Size | 4.3 InchesTouch Screen | 4.3 InchesTouch Screen | 4.3 InchesTouch Screen | 4.3 InchesTouch Screen |
User Authentication | Mobile Application or User Interface / QR Code/RFID Card /Password Login | Mobile Application or User Interface / QR Code/RFID Card /Password Login | Mobile Application or User Interface / QR Code/RFID Card /Password Login | Mobile Application or User Interface / QR Code/RFID Card /Password Login |
Metering Information | Consumption Units | Consumption Units | Consumption Units | Consumption Units |
Communication Requirements
Communication between EVSE and Central Server | OCPP 1.6J Protocol (Optional) |
Interface between Charger and CMS | Ethernet/3G/4G/WIFI (Optional) |
Protection & Safety Requirements
Executive Standard | IEC 62196 2017, IEC 61851 2017, SAE J1772, etc |
Safety Parameters | Over Current, Under Voltage, Residual Current, Surge Protection, Leakage Protection, Short Circuit, Over Temperature, etc. |
- Nice outlook and easy operation & simple installation can finish by customer with our on-line lessons;
- High quality and high efficiency, very stable perofrmance;
- The interface is easy understood by user; two kinds of touch screen 4.3 or 7 inch;
- Several modes of charging, also available for operation management and payment;
- Ethernet or wireless telecommunication;
- The system can support the RFID Card/OCPP 1.6J;
- Optional support for Type-2 Connector or to use Socket;
- Protection system: Have euipped with Overload integrated Protection System;
- The output device prevents the battery pack from charging the output filter capacitor of the charger, and prevents the instantaneous high current from occurring at the output end of the charger when the battery pack is connected.
- Certification of CE and ROHS.
- Able to upgrate the online data;
- Have function of Electrical isolation between input and output of charger.
They are suitable for occasions such as private villas, residential areas, commercial ofice
buildings,urban complex parking lots or urban public charging stations that can charge
slowly for a long time; or applied for 4S stores of new energy vehicles, workshop debugging areas, road rescue of new energy vehicles and other occasions that require frequent change of charging station sites or temporary power supply.It is suitable for all kinds of parking lots in urban public charging stations (private cars, commuters, buses), urban residential districts, shopping plazas, power business places, etc. of city special charging stations (buses, taxis, public service vehicles, sanitation vehicles, logistics vehicles, etc.) It is especially suitable for fast charging situations such as charging stations on intercity expressways where DC is needed, especially in the case of limited sites.
Here we list down some of application scenarios:
1. Business organizations: Supermarket, Shopping mall, Hotel, Restaurant, Pharmacy
2.Non-profit organizations: Airport, Railway / bus station, Exhibition, Museum, Hospital, School, Convention center, Lottery station, Government affairs center
3.Financial organizations: Bank, Insurance company, Foundation, Security company
4.Entertainments: Movie theater, Club, Bar, Salon, Gambling house
In the course of transportation, the charger should be packed firmly and intact in
a solid wooden packing box, and the direction of loading and unloading should be marked.
The charger should not be stored and transported upside down. In the course of
transportation, corresponding tightening measures should be taken to avoid strong
vibration and bump damage to the outer packaging of equipment. After arrival of the
goods, user should check whether there is any damage. If there is any transport damage,
user should consult with the transport party or our company to solve it. Check whether
the contents in the box are in conformity with the packing list immediately after
opening the box.
The packaged equipment should be stored in the room where the relative humidity is
less than 80% and the ambient air temperature is -20℃ to +55℃. Storage places should
be dry, clean and airy, and can prevent the invasion of harmful gases. It is strictly
forbidden to store corrosive articles in the same place.
Note: It is strictly forbidden for non-professionals to disassemble equipment
components.
![](https://kscharger.com/wp-content/uploads/2022/08/packing-andshipment.png)
Our Factory have certifications such as CE ISO Certifications. TUV /UL /CE Certificated for Overseas on cable and wire.
![](https://chargersgo.com/wp-content/uploads/2024/05/Company-Certifications-1024x744-1.jpg)
- Charger body is easy to be fixed with anchor bolts to prevent it from inclining
and dithering due to external and human factors. - Shading and rainproof measures should be taken for chargers. It is suggested
to install shelters outdoors. - Check regularly whether all bolts in chargers are tightened, whether the connecting wires are loosened or not, or the connection is not firm, etc.
- Check for short circuit.
- Check whether the emergency stop button is available.
- Attention should be paid to lightning protection to ensure effective shielding
and reliable grounding of chargers. - When in use, the output voltage and current of the charger should be controlled within the nominal range to ensure that the charger works in the state of maximum efficiency.
- When the charger stops using, the charging output should be stopped first, then the cable should be wrapped and put back in place.
Note: During the transportation, the chargers should be packed firmly and the
direction of loading and unloading should be marked. It is forbidden to store and
transport chargers upside down. Corresponding tightening measures should be taken
to avoid strong vibration and turbulence damage to the outer packaging of equipment.
- Decades of Experiences: As a Chinese academy of sciences park high-tech enterprise and manufactory, our factory establised since 2002, with over 10 years factory development, our factory became famous brand in China. We believe new energy is the future, better to environment and more economical to our life. We are an integrated hi -tech electronic company. “Passion, Honesty, Sound service, Keen cooperation and Development” are our goals. We are here expecting friends all over the world!
- Various Charging Products: Full range of charging products as well as charger accessories. Provide full support to customer after-sale services. Most of the model of produts are able to be customized.
- For all the products that we shipped have 1 year warranty period as well as life time spare parts and accessories with competitive price .
- Accept customized OEM ODM products.
- Experienced foreign trade team to handle the shipment and after-sale services.
- Efficient and fast supply chain.
Our factory With the professional R&D and Sales & Service Team. This enable us not only can provide the products but also a complete solution for EV Charing Station. Besides, OEM&ODM or engineering application assistance are also provide to our customer. Over decades of experience in electric power industry, our facotry also received high praise from international renowned enterprises for the great products and service.
Certificate: | CE RoHS FCC Certificate | Warranty: | 12 Months |
Input Voltage: | 110V-380V | Output Voltage: | 0-750V |
Working Temperature: | -25℃-55℃ | Application: | Home Use/Commercial Use |
OEM Service: | Color,Logo,Package, cable length, cable color | Supply Ability : | 4000 Piece/Pieces per Week |
Packaging & Delivery: | Shanghai Port | Capacity | 4000 Piece/Pieces per Week |
Lead Time: | Quantity(units) 1 – 5 5 working days | Factory Type | Supplier |
Country / Region | China/Gungdong | Main Products | EV Charging Station, EV Charging Cable, EV Charging Connector |
Factory employees | Over 100 people | Total Annual Revenue | Above US$100 Million |
Main Markets | Europe South America | Connection: | type 1 or 2 plug |
Mass production price | Negotiable | Charger Capacity | 3.5kw~480kw |
Current | DC/AC | Plug type | Type 1,2,CHAdemo/CCS-2/CCS-1 |
![](https://kscharger.com/wp-content/uploads/2022/08/Factory-Pictures-workshop.jpg)
ChargersGO have various Low Power EV Charger Voltage and Power, which can meet wide aspect of requirement.
High Power 220V EV Charger
High Power 240V EV Charger
60kw ev charger
DC fast charger voltage
Application
They are suitable for occasions such as city special charging stations that provide charging for bus, taxi, public service vehicles, sanitation vehicles,logistics vehicles, etc.; city public charging stations that provide charging for private cars, commuter, bus; intercity highway charging stations and other occasions that need special DC fast charging. EV Bus station, Highway gas, sevice station, Parking garage, commercial operators, EV infrastructure operations and service providers, EV dealer workshops.
![32a ev charger application pictures](https://www.kscharger.com/wp-content/uploads/2022/08/32a-ev-charger-application-pictures.jpg)
![EV-Charger-Voltage-and-power](https://www.kscharger.com/wp-content/uploads/2022/09/EV-Charger-Voltage-and-power.jpg)
Here we list down some of application scenarios:
- Business organizations: Supermarket, Shopping mall, Hotel, Restaurant, Pharmacy
- Non-profit organizations: Airport, Railway / bus station, Exhibition, Museum, Hospital, School, Convention center, Lottery station, Government affairs center
- Financial organizations: Bank, Insurance company, Foundation, Security company
- Entertainments: Movie theater, Club, Bar, Salon, Gambling house
Suitable for Car Brands:
Almost all the electric car, minibus, bus, van vehicles are suitable. Please contact with our sales team to confirm the right models.
KINGSTAR EV YUTONG EV BYD EV GEELY EV BENZ EV ZXAUTO DONGFENG MOTOR
![](https://www.kscharger.com/wp-content/uploads/2022/09/Brand.jpg)
Transportation
In the course of transportation, the charger should be packed firmly and intact ina solid wooden packing box, and the direction of loading and unloading should be marked. The charger should not be stored and transported upside down. In the course of transportation, corresponding tightening measures should be taken to avoid strong vibration and bump damage to the outer packaging of equipment. After arrival of the goods, user should check whether there is any damage. If there is any transport damage, user should consult with the transport party or our ompany to solve it. Check whether the contents in the box are in conformity with the packing list immediately after opening the box. The packaged equipment should be stored in the room where the relative humidity is less than 80% and the ambient air temperature is -20℃ to +55℃. Storage places should be dry, clean and airy, and can prevent the invasion of harmful gases. It is strictly forbidden to store corrosive articles in the same place. Note: It is strictly forbidden for non-professionals to disassemble equipment components.
![](https://kscharger.com/wp-content/uploads/2022/08/packing-andshipment.png)
Certification
![Company Certifications](https://kscharger.com/wp-content/uploads/2022/08/Company-Certifications-1024x744.jpg)
Our Factory have certifications such as CE ISO Certifications. TUV /UL /CE Certificated for Overseas on cable and wire.
Why choose us
- Decades of Experiences: As a Chinese academy of sciences park high-tech enterprise and manufactory, our factory establised since 2002, with over 10 years factory development, our factory became famous brand in China. We believe new energy is the future, better to environment and more economical to our life. We are an integrated hi -tech electronic company. “Passion, Honesty, Sound service, Keen cooperation and Development” are our goals. We are here expecting friends all over the world!
- Various Charging Products: Full range of charging products as well as charger accessories. Provide full support to customer after-sale services. Most of the model of produts are able to be customized.
- For all the products that we shipped have 1 year warranty period as well as life time spare parts and accessories with competitive price .
- Accept customized OEM ODM products.
- Experienced foreign trade team to handle the shipment and after-sale services.
- Efficient and fast supply chain.
Showcase
![showcase](https://www.kscharger.com/wp-content/uploads/2022/09/showcase-all-2-1024x959.jpg)
Maintenance
- Charger body is easy to be fixed with anchor bolts to prevent it from inclining
and dithering due to external and human factors. - Shading and rainproof measures should be taken for chargers. It is suggested
to install shelters outdoors. - Check regularly whether all bolts in chargers are tightened, whether the connecting wires are loosened or not, or the connection is not firm, etc.
- Check for short circuit.
- Check whether the emergency stop button is available.
- Attention should be paid to lightning protection to ensure effective shielding
and reliable grounding of chargers. - When in use, the output voltage and current of the charger should be controlled within the nominal range to ensure that the charger works in the state of maximum efficiency.
- When the charger stops using, the charging output should be stopped first, then the cable should be wrapped and put back in place.
Note: During the transportation, the chargers should be packed firmly and the
direction of loading and unloading should be marked. It is forbidden to store and
transport chargers upside down. Corresponding tightening measures should be taken
to avoid strong vibration and turbulence damage to the outer packaging of equipment.
Factory Introduction
By virtue of high-quality products and services, our factory has won many awards such as “Gazelle Enterprise”,” Excellent Software Demonstration Enterprise”, “Intelligent Manufacturing Pilot Demonstration Enterprise”, “Little Giant Enterprise in Science and Technology”. etc. It has also wined awards as “2017 Best Charging Solution Supplier”, “2018 Top 10 Charging Pile Brands in China Green Logistics Industry”,2019 Top 10 Charging Pile Brand Award, “2020 Top 10 Influential Brands in China Charging Facility Industry” and many other industry awards. Meanwhile factory has successfully passed the assessments as “safety production tandardization of the three-level enterprise”, “international ISO full series management system certification” and other authoritative certification.
Certificate: | CE RoHS FCC Certificate | Warranty: | 12 Months |
Input Voltage: | 110V-380V | Output Voltage: | 0-750V |
Working Temperature: | -25℃-55℃ | Application: | Home Use/Commercial Use |
OEM Service: | Color,Logo,Package, cable length, cable color | Supply Ability : | 4000 Piece/Pieces per Week |
Packaging & Delivery: | Shanghai Port | Capacity | 4000 Piece/Pieces per Week |
Lead Time: | Quantity(units) 1 – 5 5 working days | Factory Type | Supplier |
Country / Region | China/Gungdong | Main Products | EV Charging Station, EV Charging Cable, EV Charging Connector |
Factory employees | Over 100 people | Total Annual Revenue | Above US$100 Million |
Main Markets | Europe South America | Connection: | type 1 or 2 plug |
Mass production price | Negotiable | Charger Capacity | 3.5kw~480kw |
Current | DC/AC | Plug type | Type 1,2,CHAdemo/CCS-2/CCS-1 |
![](https://kscharger.com/wp-content/uploads/2022/08/Factory-Pictures-workshop.jpg)
AC ev charger for Sale
What is DC EV Charger?
DC EV Charger is the abbreviation of “direct current electric vehicle charger” As all know, the electric power provided by the grid is always AC. So, the difference between AC charging and DC charging is the location that AC power is converted inside of the EV or outside of the EV. AC chargers with converter inside of the EV, while, DC chargers with converter inside of the charger. That is to say, when we charging with DC charger, the electric power is charged directly to the EV battery rathter than through the converter of EV. Therefore, normally speaking, DC chargers are bigger, faster. They are widely used in public business commercial charging station rather than home. That is to say, AC charger more suitable for home use, but DC in most circumstances they are for commercial public application. The maximum charging power a battery can receive depends on two factors – its specifications and the capabilities of the fast charger. Generally, EV batteries use 400V, but more recently modern EVs use 800V+ architecture, such as Porsche Taycan, Audi E-Tron GT, Hyundai Ioniq 5, Kia EV6 and Lucid Air. These cars can achieve up to 350 kW of charging power using their respective 800V chargers.
DC charger
What’s The Difference Between AC And DC?
DC Charging standard | DC Output power |
CCS1 | 180kW/150kW/120 kW/ |
CCS1 | 90 kW /60 kW/30 kW |
CCS2 | 180kW/150kW/120 kW/ |
CCS2 | 90 kW /60 kW/30 kW |
GB | 180kW/150kW/120 kW/ |
GB | 90 kW /60 kW/30 kW |
CHAdeMO | 60 kW/30 kW |
AC Charging standard | AC Output power |
Type 1 cable | 7 kW |
Type 2 cable | 43 kW /22 kW/7 kW |
Type 2 socket | 22 kW/7 kW |
GB AC cable | 43 kW /22 kW/7 kW |
- AC charger is slower than DC Charger.
- Assplication scope: AC EV Charger can be used home and public, DC EV Charger used most in public.
- AC Charger is smaller and cheaper than DC EV charger.
- AC Charger power between 2KW to 43KW while DC EV Charger between 50KW to 150KW.
![AC DC EV Charger -2](https://www.kscharger.com/wp-content/uploads/2022/09/AC-DC-EV-Charger-2.jpg)
![](https://www.kscharger.com/wp-content/uploads/2022/09/AC-DC-EV-Charger.jpg)
AC dC charging at home
ac charging pile station
type 2 ac charger for ev
Contact Us
Various EV Charger Voltage and Power Wholesale Manufacturer In China
We are wholesale manufacturer for Various EV Charger Voltage and Power , Once you have selected the right models, place your wholesale order for EV chargers.
Related Products
Related Articles
Contact Us
Frequently Asked Questions (See More FAQ)
-
Are you a factory or trading company?
We are a professional manufacturer of new and sustainable energy applications for over 20 years.
-
What is the warranty?
Warranty period is 12 months. In this period, we will supply technical support and replace the new parts by free,customers are in charge of delivery.
-
What is the packing method?
Generally, we pack our goods in brown cartons. If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters.
-
What is your terms of payment?
T/T 50% as deposit, and 50% before delivery. We’ll show you the photos of the products and packages before you pay the balance.
-
What is your terms of trade?
EXW, FOB, CFR, CIF, DAP,DDU,DDP
-
How about your delivery time?
Generally, it will take 3 to 7 working days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.
-
Can you produce according to the samples?
Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
-
What is your sample policy?
We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.
-
Do you test all your goods before delivery?
Yes, we have 100% test before delivery.
-
Is a Tesla charging AC or DC?
Teslas are equipped with onboard chargers that can handle both AC (alternating current) and DC (direct current) charging.
When you charge a Tesla at home or at most public charging stations, you are using AC charging. The AC power is supplied to the Tesla’s onboard charger, which converts it to DC to charge the vehicle’s battery. This is the most common method of charging for electric vehicles, including Teslas.
However, Teslas also support DC fast charging, commonly referred to as Supercharging. Tesla Superchargers are high-power DC charging stations that can directly supply DC power to the Tesla’s battery without the need for the onboard charger to convert it. This allows for significantly faster charging times and is especially useful for long-distance travel or quick top-ups during road trips.
In summary, Teslas can charge using both AC and DC methods. AC charging is used for regular charging at home and most public charging stations, while DC charging (Supercharging) is used for faster charging at dedicated Tesla Supercharger stations. -
Is Type 2 charger AC or DC?
A Type 2 charger is an AC (alternating current) charger.
The Type 2 charger, also known as the Mennekes charger, is the most commonly used charger for electric vehicles in Europe and many other regions. It is designed to deliver alternating current (AC) power to the electric vehicle’s onboard charger.
When you plug your electric vehicle into a Type 2 charger, the AC power is transferred from the charging station to the vehicle’s onboard charger. The onboard charger then converts the AC power to DC (direct current) to charge the vehicle’s battery.
In summary, the Type 2 charger is an AC charger, which means it provides alternating current that is later converted to direct current by the vehicle’s onboard charger to charge the electric vehicle’s battery.