Portable EV Charger with battery

Also called as “emergency ev charger”, “electric vehicle mobile charging”.

AC DC EV Charger

  • After-sales Service: Remote Online Guidance and Onsite Service
  • Type: Fast EV Charger
  • Warranty: 12 Months
  • Storage energy: 11kwh lifepo4 Single phase
  • Output power: 20kw constant power
  • Output current: 0-50A
  • Charging gun:GB/T、CCS1、CCS2、CHAdeMO optional
  • Size: 740*465*890mm
  • EXW Price One gun Without OCPP: US$ 1600/SET 1 SET(Min.Order) With OCPP:US$ 1750/SET 1 SET(Min.Order)
  • EXW Price Two gun Without OCPP: US$ 1880/SET 1 SET(Min.Order) With OCPP:US$ 2010/SET 1 SET(Min.Order)

Two Types of Portable EV Charger:

There are two types of Portable EV Charger: with battery or with out battery. The difference between this two types is there are battery for storage the electricity or not. With battery EV Charger are used in emergency rescue, because with battery, the weight of the charger is higher than another type. Usually need to carry it with car. While without battery EV charger need to connect with electricity when in charging.

Portable EV Charger with battery

Best Portable EV Charger with battery for Sale:

Portable EV Charger with battery also called “emergency mobile EV charging system”. It is the good solution for roadside or remote electric vehicle rescue when the battery runs out. With no space limitations, Our Emergency mobile EV charging system supports rapid deployment without infrastructure. It is solution for fleet operators, car dealers, and other businesses. Moreover, it is compatible with all electric vehicles, and provides DC fast charging.

Best Portable EV Charger without battery for Sale:

Parameters of Portable EV Charger with battery 20KW:

Storage energy11kwh lifepo4
Output power20kw constant power
Output voltageDC150V-750V
Output current0-50A
Charging gun cable6 meter
  Screen display4.3 inch display
Charge modeBy hand
Working temperture-10℃-60℃
IP gradeIP54
Charging gunGB/T、CCS1、CCS2、CHAdeMO optional
Charge method220V/380V AC
OtherReserved port for DC inverter
ApplicationEV emergency portable power bank


  • Charging services not only EV, can be provided without limitations of space and time, you can get charge of rescue any time.
  • High-performance charging module with a wide charging range: The built-in 11kwh battery pack provides 20kW DC power for EV charging. Also we have other models, 15kwh capacity/20kw output, 19.2kwh capacity/20kw output, 34kwh capacity/40kw output, 65kwh capacity/50kw output, 132kwh capacity/120kw output,3.84kwh Multi function 4000W portable AC / DC power supply. Different models for your choice.
  • Even for roadside or remote location, you can get rescue and timely get charged. Ideal for various applications,including service stations, auto dealerships, fleet operators, and much more.
  • It can reducing costs to high extent by avoiding the high rates associated with supplemental power during peak hours.
  • It can suitable to connect with for flexible multi-protocol charging types of connectors CCS2 or CCS1, CHAdeMO, GB/T Type 2, or Type 1 charging cables.
  • Specially design for mobile EV Charging System
  • Fast chrging tech shorten your charging time
  • Truly portable with robust castors for quick and easy movement
  • High efficiency at ≥95%
  • Start charging instantly with immediate deployment, no need to wait anymore

Portable EV Charger with battery Suitable Car Brands:

Almost all the electric car, minibus, bus, van vehicles are suitable. Please contact with our sales team to confirm the right models.



In the course of transportation, the charger should be packed firmly and intact in
a solid wooden packing box, and the direction of loading and unloading should be marked.
The charger should not be stored and transported upside down. In the course of
transportation, corresponding tightening measures should be taken to avoid strong
vibration and bump damage to the outer packaging of equipment. After arrival of the
goods, user should check whether there is any damage. If there is any transport damage,
user should consult with the transport party or our company to solve it. Check whether
the contents in the box are in conformity with the packing list immediately after
opening the box.
The packaged equipment should be stored in the room where the relative humidity is
less than 80% and the ambient air temperature is -20℃ to +55℃. Storage places should
be dry, clean and airy, and can prevent the invasion of harmful gases. It is strictly
forbidden to store corrosive articles in the same place.
Note: It is strictly forbidden for non-professionals to disassemble equipment


Our Factory have certifications such as CE ISO Certifications. TUV /UL /CE Certificated for Overseas on cable and wire.

Why choose us

  1. Decades of Experiences: As a Chinese academy of sciences park high-tech enterprise and manufactory, our factory establised since 2002, with over 10 years factory development, our factory became famous brand in China. We believe new energy is the future, better to environment and more economical to our life. We are an integrated hi -tech electronic company. “Passion, Honesty, Sound service, Keen cooperation and Development” are our goals. We are here expecting friends all over the world!
  2. Various Charging Products: Full range of charging products as well as charger accessories. Provide full support to customer after-sale services. Most of the model of produts are able to be customized.
  3. For all the products that we shipped have 1 year warranty period as well as life time spare parts and accessories with competitive price .
  4. Accept customized OEM ODM products.
  5. Experienced foreign trade team to handle the shipment and after-sale services.
  6. Efficient and fast supply chain.



  1. Charger body is easy to be fixed with anchor bolts to prevent it from inclining
    and dithering due to external and human factors.
  2. Shading and rainproof measures should be taken for chargers. It is suggested
    to install shelters outdoors.
  3. Check regularly whether all bolts in chargers are tightened, whether the connecting wires are loosened or not, or the connection is not firm, etc.
  4. Check for short circuit.
  5. Check whether the emergency stop button is available.
  6. Attention should be paid to lightning protection to ensure effective shielding
    and reliable grounding of chargers.
  7. When in use, the output voltage and current of the charger should be controlled within the nominal range to ensure that the charger works in the state of maximum efficiency.
  8. When the charger stops using, the charging output should be stopped first, then the cable should be wrapped and put back in place.
    Note: During the transportation, the chargers should be packed firmly and the
    direction of loading and unloading should be marked. It is forbidden to store and
    transport chargers upside down. Corresponding tightening measures should be taken
    to avoid strong vibration and turbulence damage to the outer packaging of equipment.

Factory Introduction

By virtue of high-quality products and services, our factory has won many awards such as “Gazelle Enterprise”,” Excellent Software Demonstration Enterprise”, “Intelligent Manufacturing Pilot Demonstration Enterprise”, “Little Giant Enterprise in Science and Technology”. etc. It has also wined awards as “2017 Best Charging Solution Supplier”, “2018 Top 10 Charging Pile Brands in China Green Logistics Industry”,2019 Top 10 Charging Pile Brand Award, “2020 Top 10 Influential Brands in China Charging Facility Industry” and many other industry awards. Meanwhile factory has successfully passed the assessments as “safety production tandardization of the three-level enterprise”, “international ISO full series management system certification” and other authoritative certification.

Certificate: CE RoHS FCC CertificateWarranty:12 Months
Input Voltage:110V-380VOutput Voltage:0-750V
Working Temperature:-25℃-55℃Application: Home Use/Commercial Use
OEM Service: Color,Logo,Package, cable length, cable colorSupply Ability : 4000 Piece/Pieces per Week
Packaging & Delivery: Shanghai PortCapacity4000 Piece/Pieces per Week
Lead Time: Quantity(units) 1 – 5 5 working daysFactory TypeSupplier
Country / RegionChina/GungdongMain ProductsEV Charging Station, EV Charging Cable, EV Charging Connector
Factory employeesOver 100 peopleTotal Annual RevenueAbove US$100 Million
Main MarketsEurope
South America
Connection:type 1 or 2 plug
Mass production priceNegotiableCharger Capacity3.5kw~480kw
CurrentDC/ACPlug typeType 1,2,CHAdemo/CCS-2/CCS-1

Portable electric car charger price

ModelNumber of charging gunsEXW price/set CCS1/CCS2EXW price/set CHAdeMO
Protable 20kw DC charging stationOne gun$3,096$3,840
Wall mount 20KW DC charging pileOne gun$3,286$4,030
ModelNumber of charging gunsWithout OCPPWith OCPP
11kwh capacity/20kw outputOne gun$10,140$11,052
11kwh capacity/20kw outputTwo gun$11,952$12,864
15kwh capacity/20kw outputOne gun$11,448$12,360
15kwh capacity/20kw outputTwo gun$13,260$14,172
19.2kwh capacity/20kw outputOne gun$12,960Noted:withou t OCPPonly manual,only one gun
34kwh capacity/40kw outputOne gun$20,580$21,492
34kwh capacity/40kw outputTwo gun$22,392$23,304
 65kwh capacity/50kw output One gun$27,996$28,908
 65kwh capacity/50kw output Two gun$29,808$30,720
3.84kwh     Multi function 4000W portable AC / DC power supplyOne gun$2,520 
132kwh capacity/120kw outputOne gun$55,116$56,028
132kwh capacity/120kw outputTwo gun$56,928$57,840

Level 1 EV Charger

EV Charger Type 2

Mobile EV charger for roadside use

Portable EV charger solar

Portable EV charger solar is avialable with solar energy.

Contact Us

FAQ (Click to see more FAQ

Yes, our factory provides not only excellent products, but also a full range of EV Charging solutions such as redesign of external apprerance. We can also provide both OEM and ODM Services to our customer. OEM services range is including color, length, logo, packaging, etc. ODM service range is including product appearance design, function setting, new product development, etc. MOQ is depend on different customized requests. If usual products, we have stock, there’s no MOQ, and can support one piece sample to customer for the sample quality checking.
1) We offer customization services to logos, brand name, packaging, and cable colors.

Our payment term is T/T 100%, 50% is first payment, rest of the balance payment finish by customer before shipment. We will send video for customer green light of shipment.

Yes, we have CE and ROHS certifications.

A portable electric vehicle charger is Aimed at both drivers nervous about range anxiety and the 65% of urban households that don’t have designated off-street parking, portable electric vehicle chargers are essentially power banks on wheels.

Normally we have stocks for most of models, and can deliver within 5 working days after recive the payment from customer. If need customization, the cycle time is 3 working days.

100% inspection for all products before shipment. The warranty period of all our products is one year. The specific after-sale plan will be free for replacement or charging a certain maintenance cost according to the specific situations.

EXW, FOB, CFR, CIF, DAP, DDU, DDP are acceptable. The detail price please check with our sales team.

Step 1: Make inquiry to our sales team, tell us the model, size, quantity and other needs.
Step 2: Confirm the order and do the first payment.
Step 3: Design confirmation before production.
Step 4: We start production and report to customer the progress.
Step 5: Do 100% inspection and testing take picture and videos and send to customer for confirmation.
Step 6: Customer arrange for the Balance.
Step 7: Arrange for the shipment.
Step 8: Customer receive the products and feedback the satisfacations.

Recommend Reading

Similar Posts