Electric Vehicle Charging Service

FAQ (See more FAQ)

Electric Vehicle Charging Service refers to the facilities and solutions that allow electric vehicle owners to recharge their vehicles’ batteries. These services provide the necessary infrastructure and equipment for EVs to be connected and charged, similar to how gasoline stations provide fuel for traditional cars. EV charging services can include different types of charging stations, such as slow chargers for overnight charging at home, fast chargers for quicker top-ups, and rapid chargers for rapid replenishment while on the go. These services are essential to support the growing adoption of electric vehicles and promote a more sustainable mode of transportation.

There are three main types of electric vehicle (EV) charging systems:

Level 1 Charging: This is the simplest form of charging and involves plugging your EV into a standard household electrical outlet. It’s quite slow, suitable for overnight charging at home, and doesn’t require any special equipment other than the charging cable that comes with the EV.

Level 2 Charging: This is a faster charging option that requires a dedicated charging station to be installed at your home or in public areas. It provides more power than a standard household outlet, allowing for quicker charging times. Level 2 charging is commonly used at homes, workplaces, and public parking lots.

DC Fast Charging (Level 3 Charging): This is the fastest charging option and is usually found at public charging stations. It utilizes direct current (DC) to rapidly charge the EV’s battery, enabling a quick top-up during longer journeys. DC fast chargers are typically located along highways and in busy urban areas for convenience during travel.

These three types of charging systems provide options for different charging needs, whether it’s slow overnight charging, faster home charging, or quick charging on the go.

This initiative focuses on establishing a charging infrastructure specifically designed for trams. The details of the project are outlined below:

Charging Station Overview: The Tram Charging Station Project entails creating dedicated charging facilities for new energy electric trams. These charging stations are tailored to accommodate electric trams equipped with onboard chargers utilizing a handshake battery BMS management system. The primary purpose of these stations is to offer specialized AC and direct current energy for charging these electric trams. Analogous to a fixed structure, these facilities are referred to as charging piles.

Functionality: The functionality of an electric pile is akin to that of a refueling machine at a gas station. These charging piles can be installed either securely on the ground or affixed to walls. They find placement in various settings, including public spaces like public buildings, shopping malls, public parking lots, as well as residential parking lots and dedicated charging stations. The charging piles are capable of providing charging services for a range of electric vehicle models, accommodating different voltage requirements. The charging pile is directly connected to the AC power grid at its input end, while the output end is outfitted with a charging plug designed for electric vehicle charging. The charging pile offers features such as timed charging, metering, and amount-based charging. It can also serve as a terminal for purchasing public power. Furthermore, this infrastructure enhancement serves to enhance the overall efficiency and practicality of public charging piles, catering to a wider range of user needs.

If you’re considering investing in charging stations, here are the comprehensive services we offer. Our standout feature is the “120KW ultra-fast charging pile,” which is the fastest in China. This positions us as a leader in securing prime locations in key cities, such as airports, high-speed rail stations, and provincial toll stations. Our focus is on investing, constructing, and operating “charging stations” for new energy vehicles. We form partnerships with bus fleets, logistics companies, and online ride-hailing platforms that have a concentrated fleet in operation. Our aim is to provide rapid and convenient charging services for operational vehicles, both commercial (our primary focus) and private cars, ensuring a vehicle can be fully charged within a maximum of 30 minutes.

Charging piles serve as devices that provide supplemental electric energy to new energy vehicles, encompassing fully electric and plug-in hybrid vehicles. These function similarly to refueling machines at gas stations. They can be strategically placed in various locations, including highways, office buildings, shopping malls, public parking lots, and residential areas, to cater to the charging needs of diverse new energy vehicle models across various voltage levels.

Here’s a breakdown of the key elements:

Charging Pile Classification: Charging piles are classified based on different standards. Common criteria include charging method, installation site, installation approach, and charging interface. Among these, classification based on charging method and installation site is most widely used.

Charging Station Definition: A charging station is a service-oriented establishment, designed to cater to the needs of new energy vehicle owners. Our focus at Wisdom Valley is primarily on serving B-end operating vehicles.

Charging Station Categories: Charging stations come in three categories: small with 1-5 piles, medium with 5-9 piles, and standard with 10 or more piles.

Characteristics and Advantages: Our charging stations feature industrial-grade materials and incorporate 67 independent sensing devices, allowing for IoT-based self-operation and maintenance. They also include a 17.5-inch digital media player. This ensures that any damage can be separately reported for prompt attention.

Smart Management: Our network ensures direct data connection, user differentiation, intelligent matching, maintenance, and control. This includes 24/7 electric pile fault alarm and comprehensive big data analysis for optimized operation.

Composition: Charging stations are comprised of key components such as the site, power infrastructure, transformer, cable, charging pile, and overall construction setup.

Construction Process: Our standardized construction process involves steps like site selection survey, station planning, reporting to relevant authorities, power arrangements, construction acceptance, site testing, and finally, station operation.

Project Advantages: Our high-power public charging station platform focuses on operational vehicles, featuring the 120KW ultra-fast charging pile capable of fully charging an electric vehicle within 30-60 minutes. This initiative involves integrating equipment manufacturers, operators, and users to build a comprehensive charging ecosystem. Our services include intelligent charging solutions for B-end (commercial partners) and C-end (private car users), generating revenue through charging fees, and providing data-backed operation services.

Investing in charging stations is a strategic move that aligns with the evolving landscape of transportation and energy consumption. It’s not only about powering vehicles but also about shaping the future of sustainable mobility and convenience for users.

Yes, electric vehicle (EV) charging stations do require maintenance to ensure their proper functionality and reliability. Just like any other type of equipment or infrastructure, charging stations can experience wear and tear over time due to various factors such as weather conditions, usage volume, and general mechanical issues.

Regular maintenance tasks for EV charging stations include:

Cleaning: Charging stations, especially those located outdoors, can accumulate dirt, dust, and debris over time. Regular cleaning helps maintain their appearance and prevents potential issues caused by clogged components.

Visual Inspection: Routine visual inspections help identify any visible signs of damage, wear, or malfunction. This includes checking for loose cables, damaged connectors, and any physical damage to the charging unit.

Software Updates: Charging stations often have software components that require updates to improve performance, security, and compatibility with evolving EV technologies.

Connector Checks: The connectors used to plug in EVs can experience wear due to repeated use. Regularly inspecting and maintaining these connectors helps prevent charging issues.

Cable Management: Ensuring that charging cables are properly organized and stored helps prevent tangling and damage, making it easier for users to connect their vehicles.

Electrical Components: Monitoring and maintaining the electrical components of the charging station is crucial for safety and reliability. This may involve checking wiring, circuit breakers, and grounding systems.

Cooling Systems: Some fast-charging stations incorporate cooling systems to manage heat generated during charging. These systems need to be inspected and maintained to prevent overheating and ensure efficient charging.

Signage and Lighting: Charging stations often have signs and lighting to guide users. Keeping these elements functional and visible contributes to a positive user experience and overall safety.

Remote Monitoring: Many charging stations are equipped with remote monitoring systems that allow operators to track performance and detect issues. Regularly reviewing these systems can help identify problems early.

Emergency Procedures: Ensuring that emergency shut-off mechanisms are operational and clearly marked is essential for safety in case of emergencies.

By conducting regular maintenance, EV charging station operators can provide reliable and efficient charging services to users while extending the lifespan of the equipment. This contributes to the growth of the EV infrastructure and supports the transition to cleaner transportation options.

Electric vehicle (EV) charging as a service refers to a convenient and accessible solution for EV owners to recharge their vehicles. Instead of solely relying on personal charging infrastructure, like home chargers, EV charging as a service offers a network of charging stations that are managed by third-party companies. These companies take care of the installation, maintenance, and operation of the charging stations, making it simpler for EV owners to find and use charging facilities, especially when they are away from home. This service model aims to make EV charging more hassle-free and widespread, contributing to the broader adoption of electric vehicles.

Yes, electric vehicle (EV) chargers do require servicing, similar to other types of equipment. Regular servicing helps ensure that the chargers are functioning properly, efficiently, and safely. Over time, various components of the charging infrastructure can experience wear and tear, and potential issues may arise.

Routine servicing includes tasks such as inspecting the physical condition of the charging station, checking for any damage or malfunctions, and cleaning the charging connectors. Additionally, software updates might be needed to keep the charger’s control systems up to date and compatible with evolving EV technologies.

Servicing is important to maintain the reliability of the charging network, prevent unexpected breakdowns, and provide a positive experience for EV users. Charging station operators or service providers typically manage the maintenance schedule to keep the charging stations in optimal working condition.

As the popularity of electric vehicles continues to grow, the demand for charging stations, or charging piles, is on the rise. These charging stations play a crucial role in supporting electric vehicles, making the quality and service they provide of utmost importance. So, what services should a reputable charging station manufacturer provide? This article delves into the specific aspects that define a top-tier charging station manufacturer’s service offerings.

  • Comprehensive Product Research and Development Services: An exceptional charging station manufacturer should excel in product research and development. The landscape of charging station technology is evolving rapidly, requiring a strong research and development (R&D) team that stays abreast of the latest technological trends and innovations. These manufacturers should possess independent intellectual property rights and be capable of producing charging station products that align with the latest industry standards. Moreover, their adaptability should extend to customization, allowing them to design solutions that cater to specific market demands and unique customer requirements.
  • High-Quality Products and Reliable Performance: Charging stations are pivotal for the safe and efficient charging of electric vehicles. Therefore, a distinguished charging station manufacturer should uphold impeccable product quality and unwavering performance. Quality control measures should be rigorous, ensuring product stability and reliability. These manufacturers should employ premium materials and advanced production processes while subjecting each charging station to thorough quality inspections and testing. Furthermore, providing customers with extended product warranties is vital, instilling confidence in the durability and functionality of their offerings.
  • Exemplary After-Sales Support: The essence of a company’s reputation often lies in its after-sales service, a facet that holds even greater significance for charging station manufacturers. A reputable manufacturer should promptly address customer concerns and requirements, offering comprehensive after-sales assistance. Their support should encompass professional technical guidance, helping customers resolve any operational issues they encounter. In cases of malfunction, quick repair and replacement services should be readily available, ensuring customers experience minimal disruption. Additionally, the manufacturer should devise well-structured maintenance plans, offering routine testing and upkeep services to maintain the charging stations’ optimal performance.
  • Streamlined Charging Network Construction and Operation: The layout and management of charging stations significantly impact the convenience of EV charging. A respected manufacturer should possess substantial experience in charging network construction and a competent operational management team. They should assist customers in planning and distributing charging stations strategically, optimizing station locations and quantities to enhance overall coverage and efficiency. Remote monitoring and management services should be in place to swiftly identify and address any operational issues. Moreover, the manufacturer should facilitate convenient charging services such as payment and settlement to enhance user satisfaction.
  • Quality Training and Technical Support: Utilizing and maintaining charging stations requires a certain level of expertise. A reputable manufacturer should offer customers comprehensive training and technical support. This includes training sessions on station operation and maintenance, detailed user and maintenance manuals, and remote technical assistance to promptly address user queries and concerns.

In essence, an exceptional charging station manufacturer should provide an array of services including robust product development, uncompromising product quality and performance, impeccable after-sales support, efficient charging network planning and operation, as well as thorough training and technical assistance. Only by offering these services can manufacturers meet user needs and elevate the usability and satisfaction of charging stations. For consumers, selecting a reputable charging station manufacturer is vital, as it directly affects their EV charging experience and safety. Therefore, while considering product price and brand, equal emphasis should be placed on the comprehensive services a manufacturer offers. Ultimately, it is those charging station manufacturers that prioritize user requirements who garner market trust and customer loyalty.

The number of car charging piles, especially the number of high-speed charging piles, is difficult to meet the charging needs of many cars. The charging pile is mainly composed of charging pile controller, charging unit, charging machine and other modules, which mainly uses CAN bus communication. The charging controller communicates with the external BMS to complete the charging process such as charging handshake. Today, Xiaobian will talk about the relevant content of the car charging pile, and hope to help you.

First, what are the functions of the car charging pile charging service platform

the car charging service management platform has three main functions: charge management, charge operation, comprehensive inquiry.

Car charging management Centralized management of basic data involved in the system, such as car information, battery information, user card information, charging pile information;

Car charging operation mainly conducts charging management for users; Comprehensive query refers to the comprehensive analysis and query of management and operation data. Second, the functional characteristics of car charging pile

1,Provide human-machine interaction; Provide DC, AC charging interface;

2, with voice prompt function; With credit card function;

3, with the function of printing vouchers;

4, real-time communication with BMS to obtain power battery type, single voltage, remaining capacity, temperature, alarm and other information;

  1. Generate control instructions and switch signals to the charger, control the start and stop of the charger, and obtain the status information of the charger;

6, with the charging interface connection state judgment, interlock, control guidance and other perfect security protection control logic;

7, with CAN2.0B, RS485 communication interface, can communicate with centralized monitoring, charging status information;

8, with leakage, short circuit, overvoltage, undervoltage, overcurrent and other protection functions to ensure the safe and reliable operation of the charging pile; Protection class IP54.

The above is this “What are the functions of the car charging pile charging service platform?” For more information, please continue to pay attention to this site.

The lifespan of an electric vehicle (EV) charger can vary depending on several factors, including the quality of the charger, usage patterns, maintenance practices, and technological advancements. Generally, a well-designed and properly maintained EV charger can last anywhere from 10 to 20 years or more.

High-quality chargers that are manufactured by reputable companies and designed to withstand various environmental conditions tend to have longer lifespans. Regular maintenance, as mentioned earlier, plays a significant role in prolonging the charger’s life. Adequate protection against factors like moisture, extreme temperatures, and physical damage can also contribute to a longer operational life.

However, it’s important to note that as technology advances, newer and more efficient charging solutions might become available, which could prompt some charger replacements before the end of their natural lifespan. Additionally, older chargers might become less compatible with newer electric vehicle models that use different charging standards or have higher power

EV Chargers for Sale:

ChargersGO Factory Informations

Our EV Charger Factory Introduction:

Business Type:Manufacturer/FactoryMain Products:EV Charger
Number of Employees:100Year of Establishment:2014.05
Production Capacity

5000Set/YearAfter-sales Service:Technical Support; on-line teach lessons
R&D Capacity:

ODM, OEMAnnual Output Value:US$5 Million – US$10 Million
No. of R&D Staff:5No. of Production Lines:6

ChargersGO Factory is a reputable manufacturer specializing in Electric Vehicle (EV) Chargers. Our extensive product range includes slow chargers, fast chargers, DC EV Chargers, AC EV Chargers, commercial EV Chargers, home chargers, and EV chargers of various levels, including level 1, level 2, and level 3. All our products adhere to strict China GMP design standards, ensuring top-notch quality and performance. Additionally, we take pride in securing various certifications to ensure the reliability and safety of our chargers.

Business Philosophy: 

“Quality is the main policy of sales” and “integrity is the principle of success” are the business philosophy of our people.  We carry out one-year warranty, lifelong maintenance service, with technical consultation and other services, and long-term supply of equipment. Welcome new and old customers to negotiate cooperation!  

Production Process:

The production of an Electric Vehicle (EV) charger entails a meticulous process aimed at delivering top-notch quality, safety, and performance. It involves several essential stages:

  • Design and Engineering: Expert engineers and designers collaborate to create a comprehensive blueprint for the EV charger. They consider factors like power capacity, safety features, charging protocols, and compatibility with various electric vehicle models.
  • Component Sourcing: After finalizing the design, the production team sources high-quality components and materials required for the charger. These may include circuit boards, connectors, casing materials, power modules, and safety components, ensuring reliability and longevity.
  • Circuit Board Assembly: The heart of the EV charger lies in its circuit board, which controls the charging process and ensures safety. Advanced Surface Mount Technology (SMT) machines precisely place electronic components on the circuit board, with certain elements carefully assembled by skilled technicians.
  • Casing and Enclosure: The charger’s casing is vital for protecting against external elements and ensuring user safety. Durable materials like aluminum or robust plastics are often used, and manufacturing techniques like injection molding create the charger’s sturdy enclosure.
  • Quality Control: Rigorous quality control checks are conducted throughout the production process to identify any defects or inconsistencies. Chargers undergo multiple tests to ensure functionality and safety compliance. Quality control specialists meticulously examine each unit to meet industry standards.
  • Safety Testing and Certifications: Before the chargers hit the market, they undergo rigorous safety testing and certifications. Electrical safety, thermal, and environmental tests ensure the chargers can perform reliably in diverse conditions.
  • Final Assembly and Packaging: Successfully passing all tests and certifications, the chargers proceed to final assembly and packaging. They are carefully packaged with user manuals and any necessary accessories.
  • Distribution and Installation: The chargers are distributed to retailers, charging network operators, or directly to end customers. Upon receiving them, they are installed at charging stations or offered to electric vehicle owners for home charging.
  • Customer Support and Maintenance: Manufacturers provide ongoing customer support and maintenance services to ensure the chargers continue to perform optimally. This includes troubleshooting assistance, firmware updates, and periodic inspections.

By adhering to this comprehensive production process, EV charger manufacturers ensure that their products are efficient, reliable, and safe, contributing to the broader adoption of electric vehicles and sustainable transportation.

By following a well-structured production process and adhering to strict quality standards, manufacturers can produce high-quality EV chargers that contribute to the growth of electric mobility and a greener, sustainable future.



Small EV Charger Packing:

Retail and Wholesale Packaging of Small EV Chargers for Shipment

Retail Small EV Charger Shipment:

For retail orders, Small EV Chargers are shipped using express shipping methods.

Wholesale Small EV Charger Shipment:

For wholesale orders, Small EV Chargers are carefully packed in export fumigation-free wooden cases, suitable for bulk shipments or container transportation.

  • Packing Small EV Chargers for Sea Shipment:
    When preparing Small EV Chargers for sea shipment, utmost care is taken to ensure their protection from potential damage during transit. Here are the standard steps followed by manufacturers when packing Small EV Chargers for sea shipment:
  • Cleaning and Drying: Prior to packing, each charger is thoroughly cleaned and dried to prevent any moisture or debris that could cause harm during transit.
  • Disassembly: Where possible, the charger is disassembled into its individual components, reducing its overall size and facilitating easier packing.
  • Protective Wrapping: The charger is wrapped in a layer of protective material, such as bubble wrap or foam, shielding it from scratches and potential impacts during transit.
  • Sturdy Packaging: The wrapped charger is then placed into a sturdy box specifically chosen to match the charger’s size and weight. These boxes are constructed from durable materials, such as corrugated cardboard or plywood, capable of withstanding the demands of sea transportation.
  • Cushioning: Adequate packing material, such as packing peanuts or air pillows, is added inside the box to provide cushioning and prevent the charger from shifting during transit.
  • Secure Sealing: The box is securely sealed using high-quality packing tape, ensuring it remains tightly closed throughout the journey.
  • Proper Labeling: Each box is clearly labeled with essential information, including the charger’s name, weight, destination address, and contact details.

The primary objective of these packing measures is to safeguard the Small EV Chargers from any potential damage during sea shipment, ensuring they arrive at their destination in optimal condition. Employing correct packing procedures and utilizing high-quality materials minimizes the risk of harm during the journey.

Packing a Large EV Charger for Sea Shipment: Ensuring a Safe Voyage

Packing a large EV charger for sea shipment is a meticulous and demanding process, but with meticulous planning and precision, it can be done effectively to guarantee its safe arrival at the destination. Below are the essential steps a manufacturer may undertake when preparing a large machine for sea shipment:

  • Comprehensive Cleaning and Preparation: Prior to packing, the EV charger undergoes thorough cleaning and preparation. All fluids, such as oil or coolant, are drained, and any detachable parts are removed.
  • Disassembly for Efficiency: If feasible, the machine is disassembled into its component parts, reducing its overall size and easing the packing process. Each part is carefully labeled and numbered for easy reassembly at the destination.
  • Protection for Fragile Parts: Delicate or fragile components are meticulously wrapped in protective material, such as bubble wrap or foam, to shield them from potential damage during transit.
  • Custom Crate Construction: A custom-built crate is crafted around the machine, providing a secure and robust enclosure. The crate is constructed using durable materials, like plywood, and tailored to snugly fit the machine. Braces or supports are incorporated to prevent any movement during transit.
  • Cushioning Material Addition: The crate is thoughtfully filled with cushioning material, such as packing peanuts or air pillows, to offer additional protection and prevent the machine from shifting during its voyage.
  • Secure Fastening: The EV charger is firmly fastened within the crate, ensuring it remains in place throughout the journey. Straps, bolts, or other reliable fasteners are utilized to hold the machine securely.
  • Sealing and Clear Labeling: The crate is securely sealed using high-quality packing tape, and it is clearly labeled with essential information, including the machine’s name, weight, and relevant details. The destination address and contact information are prominently marked for easy identification.

Overall, packing a large EV charger for sea shipment demands precision and adherence to proper procedures. Employing high-quality materials and meticulous attention to detail ensures the machine’s safe and intact arrival at its intended destination. For added assurance, consulting a professional packing and shipping company can guarantee the machine is expertly packed and ready for its sea journey.

11kw ev charger-transport package 1
11kw ev charger-transport package 1

Installing an Electric Vehicle (EV) Charger requires careful planning and consideration to ensure a safe and efficient charging experience. Here is a step-by-step guide to the installation process:

Electric Vehicle Charging Service
Electric Vehicle Charging Service
  • Site Assessment: The first step is to assess the site where the EV charger will be installed. Factors to consider include the proximity to the electrical panel, available space, and access to the parking area. Additionally, the electrical capacity of the property must be evaluated to ensure it can handle the charger’s power requirements.
  • Selecting the Charger: Choose the appropriate EV charger based on your vehicle’s charging needs and the electrical infrastructure available at the site. There are various options, including Level 1 chargers (120-volt outlets), Level 2 chargers (240-volt outlets), and Level 3 chargers (fast DC charging stations).
  • Obtaining Permits: Check local regulations and obtain any necessary permits for the installation. Some areas may require electrical permits or compliance with specific building codes.
  • Electrical Panel Upgrades (if required): Depending on the chosen charger and the available electrical capacity, an electrical panel upgrade may be necessary to accommodate the charger’s power requirements. A licensed electrician can help with this process.
  • Running Wiring and Cabling: Properly run the required wiring and cabling from the electrical panel to the charging location. It’s essential to use appropriate cable gauges and follow safety standards to ensure the charger receives the correct power supply.
  • Mounting the Charger: Securely mount the EV charger on the wall or a suitable stand, ensuring it is positioned at the desired charging location and easily accessible for EV owners.
  • Connecting the Charger: Carefully connect the charger to the wiring and cabling, following the manufacturer’s instructions and safety guidelines. Double-check all connections for accuracy and tightness.
  • Testing and Activation: Before commissioning the charger, perform thorough testing to ensure it functions correctly and safely. Test the charger with an electric vehicle to ensure it can initiate and complete the charging process.
  • User Training: If the EV charger is part of a public or shared charging station, provide user instructions and any necessary training to ensure users can operate the charger correctly.
  • Signage and Markings: Install appropriate signage and markings to indicate the EV charging station’s location and any usage instructions.
  • Ongoing Maintenance: Regularly inspect and maintain the EV charger to ensure it remains in optimal working condition. Periodic inspections by a qualified technician can help identify and address any potential issues promptly.

It is crucial to have a licensed electrician perform the installation to ensure compliance with electrical codes and safety standards. Additionally, some EV charger manufacturers offer professional installation services, which can provide peace of mind and ensure a smooth and trouble-free installation process.

Applications of EV Charger:

  • Highway and Travel Routes: Level 3 chargers are strategically placed along highways and major travel routes to offer EV drivers the ability to quickly recharge their vehicles during long trips. This helps alleviate range anxiety and encourages EV adoption for long-distance travel.
  • Urban Charging Hubs: Level 3 chargers are often installed in urban areas, city centers, and public parking lots. These locations cater to drivers who need to recharge their vehicles quickly while running errands or during short stops.
  • Commercial Fleets: Businesses with electric vehicle fleets benefit from Level 3 chargers, as they allow multiple vehicles to be rapidly charged, enabling efficient operation without prolonged downtime.
  • Public Charging Stations: Level 3 chargers are a valuable addition to public charging networks, providing a convenient option for EV drivers who require fast charging while shopping, dining, or engaging in other activities.
  • Transit Stations: Charging stations equipped with Level 3 chargers can be found at transit stations, providing rapid charging solutions for electric buses, shuttles, and other forms of electric public transportation.
  • Fast-Charging Corridors: Some regions establish fast-charging corridors equipped with Level 3 chargers to facilitate long-distance travel for EV drivers, encouraging intercity and interstate journeys.
  • Airports: Airports often install Level 3 chargers in their parking facilities to cater to travelers who require quick charging upon arriving or before departing.
  • Hotel and Lodging Facilities: Hotels and lodging facilities may offer Level 3 chargers to accommodate guests with electric vehicles who need a fast recharge during their stay.
  • Rental Car Services: Car rental companies can incorporate Level 3 chargers into their fleets to ensure that rented electric vehicles are promptly recharged for the next customer.
  • Workplace Charging: Some workplaces install Level 3 chargers to provide employees with the option of a fast charge during working hours, supporting their EV adoption.

In essence, Level 3 EV chargers are vital for scenarios where EVs need to be charged quickly and efficiently to meet the demands of busy individuals, travelers, commercial operators, and public transportation services.

It is appplicable for all kinds of charing protocols, Suitable for all kinds of new energy vehicles on the market,Applicable to a variety of electric vehicles, electric buses,Forklift,golf cartsightseeing cartractor, etc.

CHAdeMONissan leaf&NV200, KIA soul, CITRONEN C-Zero%Bendingo, Peu geot On, Mitsubishi l-Mev&outlander, Geely TX electric Taxi,Zero Motorcycles, Tesla Mode S(need adapter)
CCSBMW i3,VW e-golf&e-up, Jaguar ipace, Tesla model 3, Hyundai
ioniq&kona, Audi e-tron, OPEL ampere e, Chevrolet spark, Geely TX electric Taxi,Ford focus, Renault new Zoe
GB/TBYD, BAIC,Chery, Geely, Aion S, MG, Xiao Peng, JAC, Zotype etc.
EV Charger - appplicable module

EV Charger Wholesale Manufacturer In China

Charging an Electric Vehicle (EV) involves refilling the energy stored in the EV’s battery. This is done by connecting the EV to a charging station or charger. ChargersGO is the manufacturer and wholesaler for EV Charger. Please feel free to contact with us.

Contact Us

Related Products

No posts

Related Articles

Similar Posts